Steam-cleaning, How to set the oven for steam-cleaning, After a steam-cleaning cycle – Samsung NE58F9500SS-AA Manuel d'utilisation

Page 58

Advertising
background image

STEAM-CLEANING

How to set the oven for steam-cleaning

For light cleaning, the Steam-cleaning function saves time and energy. For heavier-duty cleaning of

debris and grease, use the self-cleaning function.

1. Remove all accessories from the oven.
2. Pour approximately 10 oz. (300 ml) of water onto the bottom of the

empty oven and close the oven door.

Use normal water only, not distilled water.

3. Press STEAM CLEAN.
4. Press OVEN START/SET.

When the operation is complete, the display will blink and a beep will sound.

5. Press OVEN OFF.
6. Clean the oven’s interior.

There will be a significant amount of water remaining on the

bottom of the oven after a steam-cleaning cycle. Remove the

residual water with a sponge or soft dry cloth.

When steam-cleaning, use exactly 10 oz. of water since this produces the best results.

If you press STEAM CLEAN when the oven temperature is above 100 ˚F, Hot will appear in

the display. Because these functions produce the best results when started while the oven

is cool, we recommend that you wait until the oven has cooled down and Hot disappears

from the display.

After a steam-cleaning cycle

• Take care when opening the door after a steam-cleaning procedure has ended. The water on

the bottom is hot.

• Open the oven door and remove the remaining water with a sponge. Do not leave the residual

water in the oven for any length of time. Wipe the oven clean and dry with a soft cloth. Do not

forget to wipe under the oven door seal.

• Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the oven interior.

Remove stubborn residue with a nylon scourer. You can remove lime deposits with a cloth

soaked in vinegar.

• If the oven remains dirty, you can repeat the procedure once the oven has cooled.

• For heavy residue, such as grease left over from roasting, we recommend that you rub

detergent into the residue before activating the steam-cleaning function.

• After cleaning, leave the oven door ajar at a 15 ° angle to allow the interior enamel surface to

dry thoroughly.

English - 58

Manual Users_NE58F9500SS_AA_AC_DG68-00499A-04_EN.indd 58

2014-02-20 �� 1:35:26

Advertising