Maintaining your appliance, Self-cleaning, Before a self-cleaning cycle – Samsung NE58F9500SS-AA Manuel d'utilisation

Page 56

Advertising
background image

maintaining your appliance

SELF-CLEANING

This self-cleaning oven uses high temperatures (well above cooking temperatures) to burn off

leftover grease and residue completely or reduce them to a finely powdered ash that you can wipe

away with a damp cloth.

CAUTION

• During the self-cleaning cycle, the outside of the range will become very hot to the

touch. Do not leave small children unattended near the appliance.

• Some birds can be sickened by the fumes given off during the self-cleaning cycle of

any range. Move birds to another well-ventilated room.

Do not line the oven walls, racks, bottom, or any other part of the range with

aluminum foil. Doing so will result in poor heat distribution, produce poor baking

results, and cause permanent damage to the oven interior. Aluminum foil will melt and

adhere to the interior surface of the oven.

Do not force the oven door open. This can damage the automatic door locking

system. Use care when opening the oven door after the self-cleaning cycle is

complete. Stand to the side of the oven when opening the door to allow hot air or

steam to escape. The oven may still be VERY HOT.

Before a self-cleaning cycle

Fig. 1

• We recommend venting your kitchen by opening a window

or using a ventilation fan or hood during the self-cleaning

cycle.

• Remove the wire rack, broil pan, broil pan insert, all

cookware, and any aluminum foil from the oven.

• Wipe up debris from the oven bottom. (Fig. 1)

• The silver-colored oven racks can be self-cleaned, but they

will darken, lose their luster, and become hard to slide.

• Residue on the front frame of the range and outside the

gasket on the door will need to be cleaned by hand. Clean

these areas with hot water, soap-filled steel-wool pads, or

cleansers such as Soft Scrub. Rinse well with clean water

and dry.

• Do not clean the gasket. The fiberglass material of the oven

door gasket cannot withstand abrasion. It is essential for

the gasket to remain intact. If you notice it becoming worn

or frayed, replace it. (Fig. 2)

• Make sure the oven light bulb cover is in place and the

oven light is off.

Don’t hand

clean the

oven door

gasket.

Fig. 2

You may

hand clean

the door.

Remove oven racks and accessories before starting the self-clean mode.

English - 56

Manual Users_NE58F9500SS_AA_AC_DG68-00499A-04_EN.indd 56

2014-02-20 �� 1:35:25

Advertising