Hot surface indicator, Cooking areas – Samsung NE58F9500SS-AA Manuel d'utilisation

Page 34

Advertising
background image

Location of the radiant surface elements and controls

The radiant control knobs operate the radiant surface elements on the cooktop as shown below.

1

5

2

3

4

6

1. Left Front: 6”/9”, 3,000 W
2. Left Rear: 6”, 1,200 W
3. Right Front: 9”/12”, 3,000 W
4. Right Rear: 6”, 1,200 W
5. Warming Center: 100 W
6. Hot surface indicator

Hot surface indicator

• Comes on when the unit is turned on or hot to the touch.

• Stays on even after the unit is turned off.

• Glows until the unit is cooled to approximately 150 °F.

Cooking areas

• The cooking areas on your range are identified by permanent circles on the glass cooking

surface. For the most efficient cooking, fit the pan size to the element size.

Pans should not extend more than ½˝ to 1˝ beyond the cooking area.

• When a control is turned on, you can see a glow through the glass cooking surface. The

element will cycle on and off to maintain the preset heat setting, even at high settings.

• For more information on selecting proper types of cookware, refer to the section “Using the

proper cookware” on page 37.

English - 34

Manual Users_NE58F9500SS_AA_AC_DG68-00499A-04_EN.indd 34

2014-02-20 �� 1:35:14

Advertising