Thermador PC48 - Manuel (Page 23)

Wok Operation
Section 5: WOK OPERATION
WOK ASSEMBLY
1. Remove all packaging materials and tempo-
rary labels from the wok pan.
2. Make sure that the plastic ties used for shipping
have been removed.
Trivet
Flat Bottom Pot
Wok
Support
Ring
(attached to
cooktop)
Wok Trivet
3. Check that the support ring is properly placed
above the burner.
4. Place wok pan into support ring before turning
on the burner.
5. Turn the control knob to the LITE position. After
45 to 60 seconds, turn to the heat setting.
6. It is normal for the wok pan to discolor and
darken with use. This indicates that it is well
seasoned.
• Use the trivet to support a flat-bottom wok or a
large stock pot.
• Assemble as shown in the drawing above.
Wok
Support
Ring
(attached to
cooktop)
21- 3 /
4
"
( 55.2 mm)
12- 3 / 4"
(32.4 cm)
5
"
(12.7 cm)
21