Denon DN-S3500 - Manuel (Page 15)

9
ENGLISH
ENGLISH
8 SEAMLESS LOOP/HOT START/STUTTER
POWE
ON OFF
PARAMETER P P S PUSH ON/OFF
B TRIM CLR
T. T
T
ET
O
SAMP. P P B
REV. V V PITCH/V // OL. RELOOP
EXIT/
MODE FILE SEARCH
B TRIM
A2 B
RELAY A A
CONT. T T
q, w, y r
t, y e, y
1
4
Setting the A point
(loading the Hot Start data)
q Push the A1 or A2 button to
set the A point. (Hot Start
data loading starts.)
• A1 and A2 buttons can be
used separately for each
Hot Start.
• When an A point is set, the corresponding
A button and “ ” display lights up and
that button is set to the Hot Start mode.
• The BPM is set independently for each
Hot Start automatically.
Playing Seamless Loops
• When the B point for A1 is detected after
playback started from A1 point, playback
returns to A1 point with seamless. While
A1 to B looping, B point for A2 is ignored.
• When the B point for A2 is detected after
playback started from A2 point, playback
returns to A2 point with seamless. While
A2 to B looping, B point for A1 ignored.
3 -2
• If the B button is pushed during Seamless
Loop playback or after EXIT playback, the
B point moves to the point at which the
button was pushed.
• When the B point is set, the B and “ ”
indicators light up in the display.
A1
Seamless Loop/Hot Start/Stutter (A1, A2 buttons)
2
Starts Hot Start
w When A1 or A2 button is
pushed, Hot Start playback
starts from the corresponding
A point. A1
3 -1
Setting the B point for Seamless Loop
e When the B button is
pushed after setting the A
point or after starting Hot
start playback, the B point is
set and Seamless Loop
playback starts from the A
point.
• The B button works with respect to the A
point.
B 5
Exit/Reloop
r In Seamless Loop playback,
you can force exit or return
to the loop.
EXIT:
During Seamless Loop
playback, push the EXIT/RELOOP button to
exit from loop. DN-S3500 continues
playback after the B point.
RELOOP:
When the EXIT/RELOOP button is pushed
after exit the loop, Seamless Loop playback
resumes from the A point instantly.
RELOOP
EXIT/
Operation display (refer to the
section describing the display)
7 SCRATCH
PARAMETER P P S PUSH ON/OFF
T. T T ET
ECHO/LOOP
FLANGER
FILTE L L R
BRAKE DUMP REVERSE
PITCH
RANGE
KEY ADJUST
F F H
CUE
EJECT
DISC
RELAY A A
q
w
e
You can Scratch in CD or Sampler mode.
3
Scratch Disc
e When MAIN is selected as
the Scratch mode and
Scratch Disc is turned by
hand, the Main Track (CD)
is being scratched.
When SAMPLER is selected as the Scratch
mode and Scratch Disc is turned by hand,
the sample is being scratched.
2
Select Scratch direction
w Select the direction for
scratching using the
SCRATCH direction select
lever.
BOTH
FWD
1
Select Platter source
q Select the source to be
scratched using the PLATTER
SOURCE button.
MAIN: The PLATTER SOURCE button
lights up in orange.
SAMPLER: The PLATTER SOURCE button
lights up in green.
(Only when a sample is loaded)
SOURCE