Installation instructions, Mount the microwave oven, Installing the charcoal filter – Danby DOM161KBLSDD Manuel d'utilisation

Page 53

Advertising
background image

Charcoal

Filter

INSTALLATION INSTRUCTIONS

C5

MOUNT THE MICROWAVE OVEN

(cont.)

5

Insert 2 self-aligning screws through outer top cabi-
net holes. Turn two full turns on each screw.

6 Tighten center

screw completely.

7

Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)

6

Tighten center
screw completely.

8

Install grease filters. See the Owner’s Manual
packed with the microwave.

INSTALLING THE
CHARCOAL FILTER

C6

1

Remove screws on top of out case using a #1
Phillips screwdriver.

2

Open the door

3

Remove the grill
Pull the grill straight off.

4

Install the charcoal filter. When properly installed,
the wire mesh of the filter should be visible from
the front.

5

Replace the grille and the screws.

6

Close the door

Insert mesh-side up

22

Advertising