Danby DOM161KBLSDD - Manuel (Page 45)

House Duct
Cabinet Front
Cabinet Bottom Shelf
Filler Block
Microwave Oven Top
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
INSTALLATION INSTRUCTIONS
MOUNT THE MICROWAVE
OVEN (cont.)
A4
4 Attach the microwave oven to the top cabinet
Insert 2 self-aligning screws through outer top
cabinet holes. Turn two full turns on each screw.
5
6 Tighten center
screw completely.
6 Tighten center
screw completely.
7
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
8
Install grease filters. See the Owner’s Manual
packed with the microwave.
ADJUST THE EXHAUST
ADAPTOR
A5
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Back of
Microwave
For Front-to-Back or
Side-to-Side Adjustment,
Slide the Exhaust Adaptor
as Needed
Blower Plate Damper
A6
CONNECTING THE DUCTWORK
1
2
Extend the house duct down to connect to
the exhaust adaptor.
Seal exhaust duct joints using duct tape.
14