Danby DOM161KBLSDD - Manuel (Page 40)

INSTALLATION INSTRUCTIONS
DETERMINING WALL PLATE
LOCATION UNDER YOUR
CABINET
Mounting Plate Tabs
Touching the Cabinet Bottom
At least 30″, up to 36″
30 ″ to Cooktop
Mounting Plate Tabs
Touching the Back Frame
C Plate position—beneath flat bottom cabinet Plate position—beneath framed recessed cabinet
bottom
Mounting Plate with
Tabs Below Cabinet
Bottom the Same
Distance as the Front
Overhang Depth
30″ to Cooktop
Plate position—beneath recessed bottom cabinet with
front overhang
Your cabinets may have decorative trim that interferes
with the microwave installation. Remove the decorative
trim to install the microwave properly and to make it
level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level. If the
cabinets have a front overhang only, with no back or side
frame, install the mounting plate down the same distance
as the front overhang depth. This will keep the microwave
level.
1. Measure the inside depth of the front overhang.
2. Draw a horizontal line on the back wall an equal distance
below the cabinet bottom as the inside depth of the front
overhang.
3. For this type of installation with front overhang only,
align the mounting tabs with this horizontal line, not
touching the cabinet bottom as described in Step D.
9