Denon AVR-1803 - Manuel (Page 64)

ENGLISH
64
21 SPECIFICATIONS
2 Audio section
• Power amplifier
Rated output: Front: 80 W + 80 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W + 110 W (6 Ω /ohms, 1 kHz with 0.7% T.H.D.)
Center: 80 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W (6 Ω /ohms, 1 kHz with 0.7% T.H.D.)
Surround: 80 W + 80 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W + 110 W (6 Ω /ohms, 1 kHz with 0.7% T.H.D.)
Surround Back: 80 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W (6 Ω /ohms, 1 kHz with 0.7% T.H.D.)
Dynamic power: 100 W x 2 ch (8
Ω
/ohms)
145 W x 2 ch (4 Ω /ohms)
170 W x 2 ch (2
Ω
/ohms)
Output terminals: Front, Center, Surround: 1 6 ~ 16 Ω /ohms
Surr. Back: A or B 1 6 ~ 16 Ω /ohms
A + B 12 ~ 16 Ω /ohms
• Analog
Input sensitivity / input impedance: 200 mV / 47 k Ω /kohms
Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)
S/N: 100 dB (IHF-A weighted) (DIRECT mode)
Distortion: 0.008% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input)
Rated output / Maximum output: 150 mV / 7 V
Distortion factor: 0.03% (1 kHz, 3 V)
2 Video section
• Standard video jacks
Input / output level and impedance: 1 Vp-p, 75 Ω /ohms
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
• S-video jacks
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75
Ω
/ohms
C (color) signal — 0.286 Vp-p, 75
Ω
/ohms
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
• Color component video jacks
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75
Ω
/ohms
P B /C B (blue) signal — 0.7 Vp-p, 75
Ω
/ohms
P R /C R (red) signal — 0.7Vp-p, 75
Ω
/ohms
Frequency response: 5 Hz ~ 27 MHz — +1, –3 dB
2 Tuner section
[FM] (note: µV at 75
Ω
/ohms, 0 dBf=1 x 10 –15 W) [AM]
Receiving Range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
Total Harmonic Distortion (at 1 kHz): MONO 0.15% (1kHz)
STEREO 0.3% (1kHz)
2 General
Power supply: AC 120 V, 60 Hz
Power consumption: 4.5 A
1 W Max. (Standby)
Maximum external dimensions: 434 (W) x 171 (H) x 417 (D) mm (17-3/32” x 6-47/64” x 16-27/64”)
Weight: 11.7 kg (25 lbs 6 oz)
2 Remote control unit (RC-916)
Batteries: R6P/AA Type (three batteries)
External dimensions: 55 (W) x 225 (H) x 34.5 (D) mm (2-11/64” x 8-55/64” x 1-9/64”)
Weight: 165 g (Approx. 5.8 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.