Denon AVR-1803 - Manuel (Page 41)

ENGLISH
41
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as (described)
below.
1 Select the speaker whose level you want to adjust.
The channel switches as shown below each time the button
is pressed.
2 Adjust the level of the selected speaker.
FL CNTR FR SR SB
SW SL
(Main unit) (Remote control unit)
(Main unit)
(Remote control unit)
2 1
2
2
1
NOTE: Please make sure the “AUDIO” position of the slide
switch on the remote control unit.
Default setting of channel level is 0 dB.
The level of the selected speaker can be adjusted within
the range of +12 to –12 dB using the SELECT knob or
cursor buttons.
SW channel level can be turned off by decreasing one step
from -12 dB.
OFF ´ -12 dB ´ 12 dB
Only adjustable when the
channel is selected with the
CH VOL buttons on the main
unit.
“SB” appears only when “POWER AMP ASSIGN” switch
is SURR. BACK position.