Denon AVR-1803 - Manuel (Page 38)

ENGLISH
38
[2] Remote control unit operations during multi-source playback (selecting the source)
1 Set the slide switch to “AUDIO” and “ZONE2”.
5
1
2
3
4
(Remote control unit)
2 Press the ZONE2 “ON” button.
To cancel the ZONE2 mode.
Press the ZONE2 “OFF” button.
(Remote control unit)
3 Press the input source button
• The ZONE2 source switches directly.
4 The output level of the ZONE 2
SPEAKER OUT terminals can be
controlled using the VOLUME + and -
buttons on the remote control unit.
(Remote control unit)
DEFAULT SETTING (ZONE2 VOLUME LEVEL) :
- - - dB (MINIMUM)
5 When the ZONE2 SOURCE function is
set to TUNER, the preset channel can
be selected using the CHANNEL + and
- buttons on the remote control unit.
(This is only possible when the main
unit in the ZONE2 mode.)
(Remote control unit)
The main zone output can be
turned on and off with the
“MAIN ON/OFF” button.