Rev-A-Shelf 448-WC-8C Manuel d'utilisation

Fig. 3 fig. 1, Fig. 2

Advertising
background image

Installation Instructions
448 Series
Pull-Out Base Organizers

©2005 Rev-A-Shelf, LLC

2409 Plantside Drive
Jeffersontown, KY 40299
800-626-1126
www.rev-a-shelf.com

I-448WC

6/05

Step 1. Predrill two holes in floor of wall cabinet, centered, one towards the front and

one towards the rear

Step 2. Center unit on cabinet floor, align front edge to inside edge of

face frame (see fig. 1).

Step 3. Screw from underside of cabinet into block of wood (see fig.2). Screws not provided.

Step 4. Attach door to unit. Note: utilize the adjustable door mounting brackets to

ensure mounting in thick portion of cabinet door (see fig. 3).

fig. 3

fig. 1

Thick portion of door.

fig. 2

Screw from
underside of
cabinet.

NOTE: The extra set of chrome rails

(included) are for use in a 36" or 42"

height wall cabinet for additional

shelf space. Holes are predrilled.

Installation Instructions 448 Series

Pull-Out Wall Organizers

Instrucciones de instalación de los Organizadores

Deslizantes para Armarios de Pared de la Serie 448

Notice d’installation du système de rangement

mural coulissant 448

Step 1: Predrill two holes in floor of wall cabinet, centered, one towards the front and one towards the rear.

Paso 1: Taladre dos orificios iniciales en el piso del armario de pared, centrados, uno hacia la parte delantera y otro

hacia la parte trasera.

Étape 1: Forer deux trous centrés dans le fond de l’armoire murale, le premier vers l’avant et le deuxième vers l’arrière.

Step 2: Center unit on cabinet floor, align front edge to inside edge of face frame.

Paso 2: Centre la unidad en el piso del armario, haga coincidir el borde delantero con el borde interior del bastidor

delantero.

Étape 2: Centrer l’unité sur le fond de l’armoire en alignant le bord avant sur le bord intérieur du cadre avant.

Step 3: Screw from underside of cabinet into block of wood (see fig. 1). Screws not provided.

Paso 3: Introduzca un tornillo desde la parte inferior del armario al bloque de madera (ver la figura 1).

Tornillos no incluidos.

Étape 3: Visser à partir du dessous de l’armoire dans le bloc en bois (figure 1). Les vis ne sont pas fournies.

Step 4: Attach door to unit. Note: Utilize the adjustable door mounting brackets to ensure mounting in thick portion of

cabinet door (see fig. 2).

Paso 4: Monte la puerta en la unidad. Nota: Use los soportes de montaje ajustables para realizar el montaje en la parte

más gruesa de la puerta del armario (ver la figura 2).

Étape 4: Attacher la porte à l’unité. Remarque. Utiliser les supports de montage de porte ajustables pour assurer le

montage sur la partie épaisse de la porte de l’armoire. (Voir la figure 2.)

Installation Instructions
448 Series
Pull-Out Base Organizers

©2005 Rev-A-Shelf, LLC

2409 Plantside Drive
Jeffersontown, KY 40299
800-626-1126
www.rev-a-shelf.com

I-448WC

6/05

Step 1. Predrill two holes in floor of wall cabinet, centered, one towards the front and

one towards the rear

Step 2. Center unit on cabinet floor, align front edge to inside edge of

face frame (see fig. 1).

Step 3. Screw from underside of cabinet into block of wood (see fig.2). Screws not provided.

Step 4. Attach door to unit. Note: utilize the adjustable door mounting brackets to

ensure mounting in thick portion of cabinet door (see fig. 3).

fig. 3

fig. 1

Thick portion of door.

fig. 2

Screw from
underside of
cabinet.

NOTE: The extra set of chrome rails

(included) are for use in a 36" or 42"

height wall cabinet for additional

shelf space. Holes are predrilled.

Screw from

underside of

cabinet.

fig. 2

fig. 1

I-448WC-TRI

©2007 Rev-A-Shelf, LLC

2409 Plantside Drive

Jeffersontown, KY 40299

800-626-1126

www.rev-a-shelf.com

06/07

Patent Number:

7,204,569

NOTE: The extra set of chrome rails (included) are for

use in a 36” or 42” height wall cabinet for additional

shelf space. Holes are predrilled.

NOTA: El juego adicional de rieles cromados

(incluidos) se utiliza en armarios de pared de 91,4 ó

106,6 cm (36 ó 42 pulg.) para tener más área de

almacenamiento. Los agujeros han sido taladrados

previamente.

REMARQUE. La paire de rails en chrome

supplémentaire (inclus) permet d’augmenter l’espace de

rangement dans une armoire murale de 91,4 cm (36 po)

ou de 106,6 cm (42 po) de haut. Les trous sont préforés.

Advertising
Ce manuel est liée aux produits suivants: