Use [a, ▼] to change the picture mode, B btoiustingrnelbriqhtriess, Use the [a.v] to adjust the brightness – Panasonic DVD-PV40 Manuel d'utilisation
Page 21: Use [a, t] to adjust the color shade, El (gj(eigfegjd3e^cii?a
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
El (gj(EigfegjD3e^cii?a^
Use [A, ▼] to change the picture mode.
The mode is shown on the unit’s display as follows.
1 (Normal)*—^2 {Full)^3 (Zoom)
t--------- »4 (Off)*----------------i
■ The picture mode and size
The picture shown on the LCD depends on the display mode and the size recorded on
the disc.
►If you are not using the LCD on this unit, select "4 (Off)” to conserve power,
►The LCD is turned off if you close the unit.
►Horizontal lines may appear in the picture when the mode is switched to
“3 (Zoom)”, but this is not an indication of malfunction.
B BTOiustingRnelbriqhtriess
Use the [ A . V ] to adjust the bright
ness.
-5: dark *—> 5: light
Power consumption increases with the
level of brightness.
Use [A, T] to adjust the color
shade.
-5: dark *—>■ 5; light
RQT5931