Panasonic DVD-PV40 - Manuel (Page 42)

Troubleshooting Guide
NO PUY The unit cannot play this disc. O
“bAT Err” and a
number appear on the
display.
“bAT Err 1”: A problem has occurred with the battery
pack.
Consult your dealer.
“bAT Err 2”: The pack has been recharging for
12 hours but has failed to recharge for some
reason. Recharge again.
“bAT Err 3”: The battery pack has overheated during
recharging. Allow the pack to cool down
before recharging again.
No On-Screen display,
.
Go to the Display menu in the ACTION screen, and select
“On” for “On-Screen Messages”. ©
On-Screen Menu Icons
are cut off or are not
displayed at all. Press [A,V] while the rightmost icon is highlighted to move
them down. ©
U11 Wipe the disc clean. ©
H □□
□□ stands for a
number.
Trouble has occurred. The number appearing after H
depends on the problem. Turn the unit off and on again.
Alternatively, turn the unit off, disconnect the power source
(AC or battery pack) reconnect the power and turn the unit
on again.
If the service numbers fail to clear, note the service number
and contact a qualified service person.
coa
The following do not indicate maifunction.
•A sound is heard from the AC adaptor during recharging.
•The battery pack warms up after recharging or during use.
Maintenance
I To clean this unit, wipe with a soft,
dry doth.
• Use eyeglass cleaner to remove stub­
born dirt from the LCD. ■■M»ay7iin
•Never use alcohol, paint thinner or ben­
zine to clean this unit.
•Before using chemically treated cloth,
read the instructions that came with the
cloth carefully.
■ Maintenance of the lens
• If dust is attached to the lens, remove
dust carefully with an air blower for cam­
era lenses (optional).
Recommended product;
Lens cleaner kit (SZZP1038C)
• Be careful not to touch the lens with your
fingers.
RQT5931