Sony MDS-JA50ES - Manuel (Page 34)

Editing Recorded MDs
3 Turn AMS until "Name in ?" appears in the
display, then press AMS.
4 Turn AMS to select "Disc" to label an MD, or to
specify the track to label, and press AMS.
A flashing cursor appears in the display.
5 Press DISPLAY /CHAR to select the character
type as follows:
To select Press DISPLAY/CHAR repeatedly
until
Uppercase letters "A" appears in the display
Lowercase letters "a" appears in the display
Numbers "0" appears in the display
I V n 12 13 14 15
' 15 17 18
4 5
7 8 9 10
Turn AMS to select the character.
The selectedcharapter flashes.
Letters, numbers, and symbols appear in
sequential order as you turn AMS.
You can use the following-symbols in titles:
‘ - ~ U ~ V ‘ 7 8 9 10
I 12 13 14 IS
You can press DISPLAY/CHAR to change the
character type at any time during Step 6 (see
Step 5).
7 Press AMS to enter the selected character.
The cursor shifts rightward and waits for the input
of the next character.
•H TT 7 8 9 10
V|V^ 12 13 14 15
8
Repeat Steps 6 and 7 until you have entered the
entire title.
If you entered the wrong character
Press or ►► until the character to be corrected
starts flashing, and repeat Steps 6 and 7 to enter
the correct character.
To erase a character
Press or ►► until the character to be erased
starts flashing, then press EDIT/NO.
To enter a space
Press AMS or ►► while the cursor is flashing.
9 Press YES.
This completes the labeling procedure and the title
appears in the display.
To cancel labeling
Press ■.
Note
You cannot label a track or an MD while you are recording
over an existing track.
Copying a track or disc title
You can copy a track or disc title to use it as a title of
another track or the disc title within a disc. Note that
you can do this operation by using the controls on the
deck only.
1 Press EDIT/NO.
2 Turn AMS until "Name ?" appears in the display
and press AMS.
3 Turn AMS until "Nm Copy ?" appears in the
display.
4 Press AMS.
5 Turn AMS to select' "Disc" to copy the disc title, or
, the track whose title you want to copy and press
AMS.
If "Mo Name" appears in the display
The disc or the track has no name.
6 Turn AMS to select "Disc" for disc title or to
specify the track number to copy a title, and press
AMS.
"Complete!!" appears for a few seconds to indicate
that the copying operation is completed.
To cancel title copying
Press EDIT/NO or ■.
34 ^