Sony MDS-JA50ES - Manuel (Page 21)

Playing MDs
Displaying the recording date
When the internal clock has been set, the deck
automatically records the recording date and time of
all recordings. You can then check the recording date
and time of a track.
1 Locate the track for which you wanf to check the
recording date and time.
When the deck is Press •
stopped or^W
playing or on play pause , ►►!, or number buttons
Press DATE RECORDED.
"No Date" appears if the internal clock has not
been set or the track was recorded on another MD
deck without a date and time stamp function.
Changing the display
Each time you press DISPLAY/CHAR (or DISPLAY)
while the deck is stopped or playing, you can change
the display as follows:
Normal
display
The contents of
a program
(only when
"PROGRAM"
lights up)
The type of
filter
Digital
recording level
Disc title (or
title of the
current track),
counter, and
the peak level
meters
Counter
display only
□ S O N G S
IS. 46.00.
Press''CV
-
□
r~~gl
/4 - > T - 7 /
3. IB.BB.
Press
s
OF : S t a n d a r d ’ .
IS. SB. OB.
Press'"CV
B
+ 1 . S d B ’ .
IS. SB. OB.
Press''CV
S O N G S
IS. SB. OB.
Press ""O"
IS. SB. OB.
Press'^5'
Goes off
Press
Locating a Specific Track
You can quickly locate any track while playing a disc
by using the AMS (Automatic Music Sensor) control,
and buttons, number buttons, or M.SCAN
button on the remote.
IKK AMS OM
O-
©
a CZ3 o CD CD
—'.CD
o-®-®
.
0
.
0
.
0
.
00.0
© ■ ©
.
0.0
.
0.0
0-0
0 0
CBi ibj I cb
c3
CD S CD ci51®
Number
buttons
■ M.SCAN
To locate Do the following:
The next or succeeding During playback, turn AMS clockwise
tracks or press WH repeatedly until you find
the track.
The current or
preceding tracks During playback, turn AMS
counterclockwise or press
repeatedly until you find the track.
A specific track
directly [fl Press number buttons to enter the
track number.
A specific track by
using AMS 1 Turn AMS until the track number
you want to locate appears while
the deck is stopped. (The track
number is flashing.)
2 Press AMS or ►.
By scanning each track
for 6 seconds (music
scan) Tl 1 Press M.SCAN before you start
playing.
2 When you find the track you want,
press t> to start playing.
'Q' When you directly locate a track with a number over
25^: ,
You must press >25 first, before entering the
corresponding digits.
Press >25 once if it is a 2-digit track number, and twice
if it is a 3-digit track number.
To enter "0," press button 10.
Examples: • To play track number 30
Press >25 once, then 3 and 10.
• To play track number 100
Press >25 twice, then 1,10 and 10.
(Continued)
2V