Sony MDS-JA50ES - Manuel (Page 24)

Playing MDs
Creating Your Own Program
(Program Piay)
You can specify the playback order of the tracks on an
MD and create your own programs containing up to 25
tracks.
EDIT/NO YES
PLAY MODE ► ll«AMS[>Oi
If you enter the wrong track number
Press ◄◄ or ►► until the wrong track number
flashes, then enter the correct track number
with the number buttons.
4 Repeat Step 3 to enter other tracks.
Each time you enter a track, the total program time
is added up and appears in the display.
5 After finishing programming, press YES.
"Complete!!" appears and programming is
completed.
6 Press PLAY MODE repeatedly (or PROGRAM
once) until "PROGRAM" appears in the display.
7 Press ► to start Program Play.
>25-
I>-
© o
CD CD CD O CD
©[email protected]
0
.
0
-
0
.
©■©
.0.0
.0.®
.0.0
0 0
ILilJ LaJPCij
■ EDIT/NO
■YES
•PROGRAM
-Number buttons
■CLEAR
1 While the deck is stopped, press EDIT/NO twice.
2 Turn AMS to select the SOI menu and display
"Program ?", then press AMS.
3 Do either a) or b):
a) When using the controls on the deck
1 Turn AMS until the track number you want
appears in the display.
2 Press AMS.
To cancel Program Play
Press PLAY MODE repeatedly (or CONTINUE once)
when the deck is stopped until "PROGRAM"
disappears.
The program remains even after Program Play ends
When you press ►, you can play the same program
again.
Note
The display shows -m - -s" instead of the total playing
time when the total playing time of the program exceeds 199
minutes.
Checking the track order
Turn AMS (or press or ►►!) during playback or
playback pause. The track numbers appear in the
order they were programmed.
If you enter the wrong track number
Press ◄◄ or ►► until the wrong track number
flashes, turn AMS to set the correct track
number, then press AMS.
b) When using the remote
Press the number buttons to enter the tracks
you want to program in the order you want.
To program a track with a number over 25, use
the >25 button (see page 21).
24^