Philips SRU8010-17 - Manuel (Page 9)

9
Setting Up Your Devices, cont.
Pressing Save shows screen (5) that
instructs you to try a few other keys on
the remote to make sure you’ve found
the correct code. Tip: try keys like Menu,
and Guide. Power might work yet you
still might not have the correct code. If
several keys seem to work fine, press
Save Code. If some keys don’t work,
select Change Code (or press Back) to
go back and find another code that works
better. Selecting Label lets you rename
the device, e.g. you could call it My TV.
You can ignore this for now and try it
later if you like. See pages 11, 12, and 23
for more details on entering text to
change labels.
Pressing Save Code at screen (5) takes
you to screen (6) where you set up a
Cable box. You can quit at this point and
(5)
(6)
set up other devices later, or you can continue and set up other
devices - SAT, DVR, DVD, VCR, Audio, CD Player, or either
of the 2 AUX devices.
Let’s assume for now that you go ahead and set up a TV,
Cable, and SAT.
If you select No at screen (1) on the previous page the
procedure will be similar to the above, except that you will be
searching through the entire library of codes for your device
to find the one that works best (instead of just searching
through the codes for your brand of device, e.g., Philips).
If you say Yes when asked if you know your Brand, but
subsequently don’t find a code that works, you are asked if
you want to try again (in case you missed it), or try all the
codes for your device. If you try all codes for your device
type, and still don’t find a code that works, you can skip it, or
selected Learn. If you select Learn you can later learn the
commands you want for that device type.