Philips SRU8010-17 - Manuel (Page 22)

22
Next point the remote you want to learn
commands from at the bottom of the
SRU8010 remote, and press OK when
you’re ready. (See Tips on Learning on
page 16).
Learning Side Keys, cont.
Next press the key (on the other remote)
for the function you want to learn. Hold
the key pressed until the screen says that
the command was successfully learned.
Note for some types of key you might
need to hold the key pressed, but for other
types a quick press is sufficient. Experi-
ment a bit. If keys you learn are sent
multiple times try learning them with just
a quick press.
You can change the label for the key (in
this case L7) and/or add the key to a
Macro (see page 24 for Macros).
If you select Change Label, by pressing
Side Key K9, you can change the name
to anything you want. For example
you’ll likely want to rename it with the
name of the function that you learned.
After you select Change Label you see
the screen to the right. You enter the
new name for the key using the numeric
keys on the remote, in a similar fashion
to typing in text on a cell phone. See
next page.