Philips SRU8010-17 - Manuel (Page 34)

34
Advanced Settings
Press the HOME key, then select Setup,
then select Advanced.
The screen to the right lets you change
the backlight delay; enter codes for
devices directly from the printed code list
that came with the remote; set up
punchthrough for various devices; and
limit the channels that young children can
access.
Display Options
Select Options, then press a Side Key to
the left or the right of the option to adjust
the setting. Then press OK. Backlight
adjusts how long it takes before the
screen goes black (approx 2-35 seconds)
if you don’t press any keys.
Device Codes
Select Device Codes. Then Select a device.
Devices that have not yet been set up are
grayed out. You can select them here and
set them up by entering the device code
from the printed code list. Or you can
change the code for a device that had
already been set up by simply entering the
new code.
This screen also lets you view the codes for any device that’s
been set up. In the above example you can see the codes that
are set for TV, Cable, and SAT. We’ve selected CD and can
then enter its 4 digit code from the code list, using the number
keys on the remote. The above also shows that we’ve learned
codes under the AUX1 key in DVD mode.
Key Transmit Time changes the delay between digits when
sending favorites, e.g. 1–6–2. This can be used in situations
where the channels are not accepted by the set-top box.
(1)