Philips SRU8010-17 - Manuel (Page 26)

26
Point your existing remote at the bottom
of the SRU8010 remote and press OK
when you’re ready. Then press your next
key.
After adding more keys you can keep the
label for the key (in this case L1) or select
Change Label, by pressing Side Key K9.
If you select Change Label you can
change the name to anything you want.
For example you could call it My Macro,
or Macro 1.
After you select Change Label you see
the screen below to the right.
You enter the new name for the key using
the numeric keys, in a similar fashion to
typing in text on a cell phone. E.G. in this
example we pressed the 6 key on the
remote to enter the letter “M.” Then we
pressed the 2 key repeatedly until the
letter “a” was displayed. Then we waited
a second and repeatedly pressed 2 to
select “c.” Then we waited a second and
repeatedly pressed the number 7 key until
we selected “r.” Then the 6 key to select
“o.” Then the 0 (zero) key twice to select
a space, and then 1 to select 1. Macro 1 is
then displayed.
Press Done to save the new label for the
Macro you learned and stored under the
L1 key.
The next time you select the Mode that
the Macro was learned in (in this case
DVR) you’ll see that you can press the
Side Key next to “Macro 1” to activate
the Macro.
Learning Macros, cont.