Philips SRU8010-17 - Manuel (Page 13)

13
Using The Remote
Assuming you followed the steps on the previous pages and
have set up some devices and some favorites you can now use
the remote. See the sections that follow to set up more devices
and/or favorites, and to set up other functions.
Using the remote
Press the HIS or HERS key at any time
to access the favorites you’ve set up. Or
press the FAVORITE key, then select
your favorites group. Then press the
Side Key next to the logo to change
your device to that channel. Selecting a
favorite group that has not yet been set
up, takes you to the setup Wizard.
Also, when you select a mode, any extra keys for that mode,
and any keys you’ve learned for that mode are displayed. The
current mode that the remote is in is displayed with an icon in
the lower left of the screen. In the above example it’s in Cable
mode. Press HIS or HERS to return to your favorites screen.
Before you continue, press Side Key K5 next to the Help icon
and follow the prompts to get an idea of how to use the remote.
Important: Make sure you point the remote at your device
until the channel changes. Pressing a favorite key might send
the commands for say channel 162, but if you don’t point the
remote at your device until all three digits are sent you might
just get channel 16, or even channel 1. Watch the flickering
halo at the bottom left of the screen, it flickers for each digit
sent. It also shows what device is being controlled.
Press the HOME key at any time to
access the screen where you can set
things up, or access other features.
Press the MODE key, then select a
device type to change the mode that the
remote is in. E.G., if the remote is in
Cable mode then the hard keys such as
Channel Up/Down, Volume Up/Down,
numbers, etc., operate your cable box.