Panasonic PT-DW100U - Manuel (Page 56)

56 – ENGLISH
Adjusting the picture (continued)
AUTO IRIS (Automatic aperture
„
adjustment)
OFF (No automatic
adjustment)
3 (High)
1 (Low)
2 (Intermediate)
MANUAL IRIS (Fixed aperture
„
adjustment)
OFF (No fixed iris)
63 (High)
1 (Low)
2 62 (Intermediate)
DYNAMIC GAMMA (signal
„
compensation amount
adjustment)
OFF (No automatic
correction)
3 (High)
1 (Low)
2 (Intermediate)
Note
The contrast is set to the maximum level when •
“DYNAMIC IRIS” is set to “3”.
Registering the picture mode
settings as presettings
The picture settings that have been made in the
PICTURE MODE screen can be registered.
Select “PICTURE MODE” in the “PICTURE” screen •
to carry out this operation.
Press ENTER. 1.
A confirmation screen will appear. •
ENTER
OK CANCEL
SAVE AS DEFAULT SETTING
FOR DYNAMIC?
CHANGE
EXECUTE
Press
◄► to select “OK”.
2.
Press ENTER. 3.
Note
If the registered picture mode is selected after •
registering the picture mode settings as presettings,
the new signals will be displayed with the registered
adjustments.
Setting the system selector
This enables the projector to automatically recognize
input signals. Furthermore, if unstable signals are
input, the system format can be selected manually.
Press
▲▼ to select “SYSTEM
1.
SELECTOR”.
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
OFF
OFF
AUTO1
Press ENTER. 2.
The “SYSTEM SELECTOR” screen will be •
displayed.
SYSTEM SELECTOR
C
AUTO1
AUTO2
Press
▲▼ to switch “SYSTEM
3.
SELECTOR”, and then press
ENTER.
The system formats that can be selected differ •
depending on the input signals.
S-video / Video terminal input
„
signal
Select from AUTO1, AUTO2, NTSC, NTSC4.43,
PAL, PALM, PAL-N, SECAM, and PAL60.
Note
Press the DEFAULT button to return to “AUTO1”. •
“AUTO1” automatically selects from NTSC, •
PAL, SECAM, NTSC4.43, and PAL60. “AUTO2”
automatically selects from NTSC, PAL-M, and
PAL-N.
RGB1 / RGB2 / DVI-D terminal
„
input signal
Select from RGB and YP
B
P
R
.
Note
Refer to the types of signals compatible with the •
projector. (pp. 120-121)
Input module
„
ET-MD77SD1:
Select from AUTO, 480i and 576i.
ET-MD77SD3:
Select from AUTO, 1 080/60i, 1 035/60i, 720/60p,
1 080/24p, 1 080/50i, 1 080/30p, 1 080/25p,
1 080/24sF, 720/50p, and 480i, 576i.