English – 47, Basic operation automatic adjustment (auto setup), Turning on button illumination – Panasonic PT-DW100U Manuel d'utilisation

Page 47: Using the func1 button, Displaying the internal test pattern, Press light on the remote 1. control

Advertising
background image

ENGLISH – 47

Basic Operation

Automatic adjustment
(AUTO SETUP)

The automatic setup function can be used to
automatically adjust the resolution, clock phase and
picture position when analog RGB signals consisting
of bitmap images such as computer signals are being
input, or to automatically adjust the picture position
when DVI-D signals are being input. (The automatic
setup function does not work with video format
signals such as signals output from a DVD player.)
It is recommended to supply images with a bright
white frame at the outermost periphery containing
characters etc. that are clear in white and black
contrast when the system is in automatic adjustment
mode. Avoid supplying images that involve halftones
or gradation such as photographs and computer
graphics.

Press AUTO SETUP on the

1.

remote control or the main unit.

A message “COMPLETE” appears if

adjustment is ended normally.

Note

“CLOCK PHASE” may have been shifted even

when the adjustment ended normally. In this case,
manually adjust the “CLOCK PHASE”.

If an image with blurred edges or a dark

image is input, “INCOMPLETE” may appear or
adjustment may not be performed properly even
if “COMPLETE” appears. In this case, manually
adjust the items of “INPUT RESOLUTION”,
“CLOCK PHASE” and “SHIFT”.

For specific signals and landscape signals such

as 16:9, adjustment should be made according to
“AUTO SETUP” in the option menu.

Automatic adjustment may not be available

depending on the machine type of the personal
computer.

Automatic adjustment may not available for

synchronization signal of C-SYNC and G-SYNC.

Image may be distorted for several seconds during

automatic adjustment. This is not a malfunction.

For every supplied signal, adjustment is required.

Automatic adjustment can be canceled by pressing

the MENU button during the course of automatic
adjustment.

Even for an RGB signal for which automatic setup

is possible, if automatic setup is performed while
moving images are being input, “INCOMPLETE”
may appear, or adjustment may not be performed
properly even if “COMPLETE” appears.

Turning on button
illumination

Button illumination for the remote control can be
turned on.

Press LIGHT on the remote

1.

control.

Note

If no operations are carried out for approximately

10 seconds, button illumination will turn off
automatically.

Using the FUNC1 button

“DISABLE”, “P IN P” (pp. 83-84), “SUB MEMORY”
(pp. 44-45), “SYSTEM SELECTOR” (pp. 56-57), or
“FREEZE” (p. 81) operations can be assigned to the
FUNC1 button on the remote control so that it can be
used as an easy shortcut button.

Note

Refer to “Setting FUNC1” for details. (p. 81)

Displaying the internal
test pattern

The projector has eight types of internal test patterns
to check the condition of the set.
To display test patterns, follow the steps below.

Press TEST PATTERN.

1.

Press

◄► to select “TEST

2.

PATTERN”.

Note

Setting is also possible by using an on-screen

menu. Refer to “Displaying the internal test pattern”
for details. (p. 85)

Adjustment of the image, picture quality, position,

size and other factors will not be reflected in test
patterns. Be sure to display an actual input signal
before performing these adjustments.

Advertising