Panasonic PT-DW100U - Manuel (Page 121)

ENGLISH – 121
Information
Display mode
Number of
displayed dots
Scanning
frequency Dot clock
frequency
(MHz)
Format
Plug and play
H (kHz) V (Hz) RGB2
DVI-D
EDID1
DVI-D
EDID2
MAC21 1 152 × 870 68.7 75.1 100 RGB/DVI
1 280 Ч 768
1 280 Ч 768 39.6 49.9 65.3 RGB/DVI
1 280 × 768 47.8 59.9 79.5 RGB/DVI
1 280 Ч 800
1 280 Ч 800 41.3 50 68 RGB/DVI
1 280 × 800 49.7 59.8 83.5 RGB/DVI
MSXGA 1 280 × 960 60 60 108 RGB/DVI
SXGA
1 280 × 1 024 52.4 50 88 RGB/DVI
1 280 × 1 024 64 60 108 RGB/DVI
1 280 × 1 024 72.3 66.3 125 RGB/DVI
1 280 × 1 024 78.2 72 135.1 RGB/DVI
1 280 × 1 024 80 75 135 RGB/DVI
1 280 × 1 024 91.1 85 157.5 RGB/DVI
SXGA+
1 400 × 1 050 65.2 60 122.6 RGB/DVI
1 400 × 1 050 78.8 72 149.3 RGB/DVI
1 400 × 1 050 82.2 75 155.9 RGB/DVI
WXGA+ 1 440 × 900 55.9 59.9 106.5 RGB/DVI
UXGA 1 600 × 1 200 75 60 162 RGB/DVI
WSXGA+ 1 680 × 1 050 65.3 60 146.3 RGB/DVI
1 920 Ч 1 080 *1 1 920 Ч 1 080 66.6 59.9 138.5 RGB/DVI
WUXGA *1 1 920 × 1 200 74 60 154 RGB/DVI
*1: Only when using VESA CVT RB (Reduced Blanking)
Note
The number of display dots is 1 366 x 768. A signal of a different resolution than the above data is converted to •
the number of display dots and then displayed.
Character “i” that follows the number of displayed dots stands for interlace signal. •
Flicker (line flicker) will be caused in images if interlace signals are connected. •