Panasonic WV-CU161 Manuel d'utilisation

Page 7

Advertising
background image

7

y

Auto Panning/Black and White Selection/Patrol Stop
Button (AUTO/B/W/PATROL STOP)
AUTO:

Pressing this button will activate the auto pan-

ning function of cameras provided with this feature.

B/W:

Pressing this after pressing the SHIFT button will

display the picture in black and white on the moni-
tor.

PATROL STOP:

Pressing this will stop the program-

ming of the camera patrol learning function.
The following four types of Auto Panning can be
selected with numeric buttons 1 to 4, but not all of
these types are always available depending on the
camera.
For further information, refer to the Operating
Instructions for the individual combination cameras.

AUTO PAN ON or Functions set on combination cam-
era:

Simply press this button, or press Numeric button 1
followed by this button.

AUTO SORT ON:

Press Numeric button 2 followed by

this button.

AUTO SEQ ON:

Press Numeric button 3 followed by

this button.

RANDOM PAN ON:

Press Numeric button 4 followed

by this button.

u

Wiper/Auxiliary 1 Button (WIPER/AUX1)

Pressing this button will activate the housing wiper of a
camera provided with this feature. Pressing it after
pressing the Shift button will turn on the AUX1 button
controlling accessories connected to the camera.
The LEDs next to the button are each lit while the wiper
or AUX1 mode is selected.

i

Focus Buttons (FOCUS: NEAR/FAR)

These buttons are used to adjust the lens focus of cam-
era equipped with the specified lens.
When these buttons are pressed simultaneously, the
lens focus is set automatically if the specified camera is
used.

o

Zoom/Iris Buttons (ZOOM: WIDE/TELE, IRIS:
CLOSE/ OPEN)

These buttons are used for zooming a camera or to
close or open the lens iris of a camera equipped with
the specified lens.
When these buttons are pressed for approx. 1 sec. or
more simultaneously after pressing the SHIFT button,
the lens iris is reset to the factory default settings.

!0

Numeric Buttons (0-9)

These buttons are used for numeric input of preset
numbers or for executing each parameter on the
Camera Setup menu.

!1

Preset/Set/Program Preset Button
(PRESET/SET/PROGRAM PRESET)
PRESET:

In combination with the Numeric buttons, this

button is used to move a specific camera to a pre-
set position.

SET:

This button is used to execute the currently high-

lighted setting in the Setup menu.

PROGRAM PRESET:

Pressing this while holding down

the CAMERA SETUP/SETUP/PROGRAM button will
program a preset position.

!2

Home/Escape Button (HOME/ESC)
HOME:

This button is used to return a specific camera

to the home position.

ESC:

This button is used to escape from the currently

highlighted selection and return to the previous
menu of the Setup Menu.

!3

Shift Button (SHIFT)

Pressing this button in combination with buttons to
which special functions have been assigned will acti-
vate these functions.
The LED next to the button is lit when the button is
pressed.
The LED next to the button goes off when the button is
pressed again.

!4

Alarm Reset/Suspend Button
(ALARM RESET/SUSPEND)

Pressing this button while the alarm function is activat-
ed will reset the alarm of the system.
Pressing this button will activate the alarm suspension
mode after pressing the SHIFT button.
The LED next to the button is lit while alarm suspension
mode is selected.
Pressing the button after pressing the SHIFT button
again will cancel the alarm suspension mode.

!5

Camera Setup/Setup/Program Button
(CAMERA SETUP/SETUP/PROGRAM)

Pressing this button for 2 seconds or more after press-
ing the SHIFT button will open the Camera Setup menu.
Pressing it in combination with the Numeric buttons will
execute the Setup menu of the System Controller. The
LEDs next to the button are each lit during the Camera
Setup or Setup operation.
This button is also used to program the camera patrol
learning and preset position functions.

!6

Slow/Camera Function Button (SLOW/CAMERA
FUNCTION)

If this button is pressed while the joystick controller is
moved, pan/tilt speed will decrease.
Pressing it in combination with the numeric buttons after
pressing the SHIFT button will execute camera func-
tions.

Advertising