Camera patrol learning for camera patrol operation, Learning, Preset position setting – Panasonic WV-CU161 Manuel d'utilisation

Page 31

Advertising
background image

31

Camera Patrol Learning for Camera Patrol
Operation

The camera patrol learning function can be setup either
from the Camera Setup menu or while operating the cam-
era.
Follow the procedures below to setup the function for a
connecting combination camera.

1. Press the

PATROL PLAY/PATROL LEARN

button

within approx. 2 seconds while holding down the

CAM-

ERA SETUP/SETUP/PROGRAM

button.

Note:

Unless the PATROL PLAY/PATROL LEARN but-

ton is pressed within approx. 2 seconds or more
after holding down the CAMERA SETUP/SETUP/
PROGRAM button, the screen returns to the Setup
menu of the WV-CU161 or the Camera Setup menu.

LEARNING

B/W

AUTO

PATROL STOP

CAMERA

SETUP

SETUP

PROGRAM

2. Run the camera through a patrol by using the joystick,

zoom buttons etc. This combination camera will learn
(memorize) the patrol. Maximum learning time is 30
seconds.

3. To stop the learning process, press the

AUTO/B/W/

PATROL STOP

button while holding down the

CAM-

ERA SETUP/ SETUP/PROGRAM

button.

3. Press the

PRESET/SET/PROGRAM PRESET

button

while holding down the

CAMERA SETUP/SETUP/PRO-

GRAM

button.

Preset Position Setting

Preset positions can be programmed either from the
Camera Setup menu or from the System Controller.
The following functions are available with the respective
functions.

1. Move the combination camera to the desired preset

position by using the joystick.

CAMERA

SETUP

SETUP

PROGRAM

[LEARNING] appears on the monitor.

PATROL

PLAY

PATROL LEARN

[LEARNING] disappears from the monitor.
Learning program

• Pan/Tilt (Joystick)
• Iris (Open/Close)
• Focus (Far/Near)
• Zoom (Tele/Wide)
• Preset Position

Note:

The learning program differs depending on the

camera. For further information, refer to the
Operating Instructions for the camera to check the
operations covered by the learning program before
operating the camera.

UP

L

R

DOWN

2. Press the numeric button for the preset position to be

learned.

1

2

3

4

6

7

8

9

0

5

PROGRAM

PRESET

ESC

HOME

SET

PRESET

PROGRAM

PRESET

SET

PRESET

CAMERA

SETUP

SETUP

PROGRAM

The actual camera position at the preset number pro-
grammed in procedure 3 is learned as preset.
Preset data program

• Pan/Tilt (Joystick)
• Iris (Open/Close)
• Focus (Far/Near)
• Zoom (Tele/Wide)

Note:

The preset data program differs depending on

the camera. For further information, refer to the
Operating Instructions for the camera to check the
operations covered by the preset data program
before operating the camera.

Advertising