Camera setup, Keys used in camera setup menu – Panasonic WV-CU161 Manuel d'utilisation
Page 30
30
CAMERA SETUP
You can use the WV-CU161 to setup the camera from the
Camera Setup menu.
For further information, refer to the Operating Instructions
for the individual combination cameras.
●
Camera Setup
1. Press the
CAMERA SETUP/SETUP/PROGRAM
button
for 2 seconds or more to access the Camera Setup
menu. The
CAMERA SETUP
indicator lights up.
CAMERA
SETUP
SETUP
PROGRAM
5. Press the
CAMERA SETUP/SETUP/PROGRAM
button
for 2 seconds or more to complete the Camera Setup.
2. Select an item and parameter by pressing numeric but-
tons
2
,
4
,
6
and
8
.
3. Press the
PRESET/SET/PROGRAM PRESET
button to
execute the parameter or enter a submenu.
*** SET UP MENU ***
PRESET 1*
MAP
HOME POSITION
SELF RETURN
AUTO MODE
AUTO PAN KEY
DIGITAL FLIP
LOCAL/REMOTE
SPECIAL1
CAMERA
RS485 SET UP
15
10MIN
AUTO PAN
SEQ
OFF
LOCAL
(Example of Camera Setup menu)
CAMERA
SETUP
SETUP
PROGRAM
1
2
3
4
6
7
8
9
0
5
PROGRAM
PRESET
ESC
HOME
SET
PRESET
PROGRAM
PRESET
SET
PRESET
4. To return to the previous menu, press the
HOME/ESC
button.
ESC
HOME
Notes:
• To display the special menu, move the cursor to [SPE-
CIAL] on the Setup menu, and press numeric buttons
4
and
6
simultaneously for 2 seconds or more.
• To restore all defaults, move the cursor to [CAMERA
RESET]* on the Setup menu, and press buttons
4
,
5
and
6
simultaneously for 2 seconds or more.
* The menu to restore the camera defaults differs
depending on the camera:
[SPECIAL] for the WV-CS654, [SPECIAL 2] for the WV-
CS854, and [END] for fixed cameras, etc.
Caution:
If camera setup is started using the buttons
on the camera, all future operations for setup must
be performed with buttons.
If camera setup is started using the System
Controller, all future operations for setup must be
performed using the same controller.
Note:
For further information, refer to the Operating
Instructions for the selected camera.
●
Keys Used in Camera Setup Menu
CAMERA SETUP/SETUP/PROGRAM button:
To display a program menu by pressing CAMERA
SETUP/SETUP/PROGRAM button 2 seconds or more.
CAMERA
SETUP
SETUP
PROGRAM
CAMERA SETUP/SETUP/PROGRAM button:
To enter a submenu.
CAMERA
SETUP
SETUP
PROGRAM
HOME/ESC button:
To return to the previous menu.
ESC
HOME
Numeric buttons:
To move the cursor.
To select modes.
2
8
4
6