Use other equipment with your flat panel tv 05 – Pioneer KURO PRO-151FD Manuel d'utilisation
Page 79
79
En
Use Other Equipment With Your Flat Panel TV
05
To delete a learned code, overwrite it with a new code on the same button or follow the directions below.
1 ) Concurrently press
EDIT/LEARN and 2.
The selected mode indicator flashes when the remote control is ready to be learned.
2 ) Press and hold
TV
for more than two seconds.
The remote control starts deleting all learned codes for selected modes. When completed, the mode
indicator blinks Off and the remote control returns to normal operation.
5.1.2 Assign a Manufacturing Code to the Remote Control
To assign a preset Manufacturing code to the panel’s remote control,
follow the directions below. (For Manufacturing codes, refer to “8.2
Manufacturer Codes to Program into the Remote Control.”)
1 ) Press
SELECT to choose the device to program.
2 ) Press
EDIT and 1 at the same time.
The selected mode indicator flashes when the remote control is
ready to be programmed.
3 ) Use the number buttons to enter a manufacturer code.
When the indicator turns off, the code has been programmed into
the remote control.
5.1.3 Issue a Library Search for a Manufacturer Code
If the code for a particular device is unknown, cycle through the
available codes for a similar unit then sample some functions for that
code.
To find the code that properly operates the unit, follow the steps below
using differemt codes to find the best match.
1 ) Press
SELECT to choose the device to program.
2 ) Press
EDIT and 3 at the same time.
The selected mode indicator flashes when the remote control is
ready to search the code library.
3 ) Sample the code using a SOURCE POWER, PLAY, 1 or CH+
command.
4 ) Use the up/down arrow (
/) buttons to advance to the next code
if the code fails to control the device.
Another option is to return to the previous code and repeat Step 3.
5 ) Press
ENTER to lock in the code that properly operates the device.
All the available buttons for the selected mode are added when
the mode indicator flashes on for one second. The remote control
then returns to normal operation.
1
2
3
4
5
6
7
8
9
INPUT
TV
RCV
VCR
SAT
CBL
DVR
DVD
VOL
SELECT
RECEIVER
EDIT
/LEARN
1
2
3
FREEZE
SPLIT
SWAP
SHIFT
TOP MENU
SAT / DVD MENU
HDMI
CTRL
SOURCE
INPUT
TV
RCV
VCR
SAT
CBL
DVR
DVD
STOP
VOL
SELECT
REC
HMG
HOME
MENU
RETURN
ENTER
RECEIVER
EDIT
/LEARN
PRO151FD.book Page 79 Wednesday, April 2, 2008 10:19 AM