Pioneer KURO PRO-151FD - Manuel (Page 54)

54
En
03 Basic Operations For Television Viewing
Delete a New Ratings System
If an added ratings system is no longer needed, delete the ratings system from your flat panel TV. It is unnecessary
to remove blocks from individual channels or programs. Deleting the ratings line removes any/all blocks initiated
with that system.
1 ) Access the System Setup through the Setup.
2 ) Select Parental Control from the System Setup menu.
3 ) Select Digital Regional Ratings from the submenu.
4 ) Select RRT Reset to delete the new ratings system from the flat panel TV.
The message “Reset digital regional ratings?” appears.
5 ) Select OK.
6 ) Press HOME MENU to exit the menu.
While the Parental Control menu is open, the status display remains unchanged even if the system receives
broadcasts carrying new ratings.
3.5.4 Temporarily Remove a Block
The password entry screen appears when detecting the blocked rating signals (with the picture and sound turned
off). Entering your four-digit password allows you to view the program until your flat panel TV is placed into
Standby or turned Off. To temporarily remove a block, follow the steps below.
1 ) Tune the flat panel TV to the blocked channel.
2 ) Wait for the Block message to appear on screen.
3 ) Enter the four-digit password.
The password window appears. When a four-digit password is entered, or no operation is performed within
60 seconds, the window disappears. To recall the window after it disappears, change the channel or input
source then return before repeating the above steps.
For INPUT 2 (except 480i signals) and INPUT 4 through INPUT 7, the password entry screen appears when Block
is selected from the Unavailable Ratings menu.
Please Input Your Password.
PRO151FD.book Page 54 Wednesday, April 2, 2008 10:19 AM