03 basic operations for television viewing – Pioneer KURO PRO-151FD Manuel d'utilisation
Page 46
46
En
03
Basic Operations For Television Viewing
Blue LED Dimmer
Adjust the brightness of the POWER ON indicator depending on the brightness level of the viewing area. Setting
to Auto toggles the brightness of the indicator between High, Mid and Low to match the brightness level of the
viewing area. To set the indicator, follow the directions below.
1 ) Access the
Option through the Setup.
2 ) Select
Blue LED Dimmer from the Option menu.
3 ) Select
Auto, High, Mid or Low from the submenu.
4 ) Press
HOME MENU to exit the menu.
3.4.2 General Picture (Video) Adjustment for an AV Source
The directions below apply to all AV sources except OPTIMUM. If the viewing option is OPTIMUM, your flat panel
TV automatically adjusts the picture to the best possible level.
1 ) Access the
Picture through the Setup.
2 ) Select an item to be adjusted.
Contrast is used in the example below.
3 ) Use the arrow buttons (
/) to adjust to the desired level.
4 ) Press
HOME MENU to exit the menu.
Reduce Noise from Analog TV
Sometimes electronic signal static can cause imperfections in the picture. This static is called Video Noise. Your
flat panel TV can reduce video noise from an analog TV channel, depending on the broadcast signal level.
Sometimes the broadcast signal has higher interference levels so that some video noise is noticeable.
This function is only selectable for signals from an antenna. Follow the steps below to reduce noise on an analog
TV channel.
1 ) Access the
System Setup through the
Setup.
2 ) Select
Analog TV Setup from the System Setup menu.
3 ) Select
Manual Adjust from the submenu.
Only analog channels set using Auto Installation are manually adjustable.
4 ) Select
Program Entry.
5 ) Select a channel number to be added.
Use the arrow buttons (
/) to enter a channel number.
6 ) Select
Tuner NR.
7 ) Select
On.
The default setting is On.
8 ) Press
HOME MENU to exit the menu.
AV Selection
:
PERFORMANCE
Contrast :
40
Brightness :
0
Color :
0
Tint :
0
Sharpness :
0
Pro Adjust
Reset
Picture
Contrast
32
PRO151FD.book Page 46 Wednesday, April 2, 2008 10:19 AM