10 hmg setup, 05 use other equipment with your flat panel tv – Pioneer KURO PRO-151FD Manuel d'utilisation
Page 118
118
En
05
Use Other Equipment With Your Flat Panel TV
5.10 HMG Setup
Use the HMG Setup option for Network Setup, Auto Connection Setup and Default Settings. For more information
about each option, refer to the following sections.
Network Setup
Select whether to acquire the IP Address automatically or manually or, when acquiring manually, set the IP
Address and Subnet mask. To access the Network Setup menu, follow the steps below.
Automatic:
To perform the procedure, DHCP on your server or router must be valid.
1 ) Press
HMG.
The Home Media Gallery menu appears on screen.
2 ) Select
HMG Setup from the menu.
Use the arrow buttons to highlight an option then press ENTER.
3 ) Select
Network Setup.
4 ) Select
Auto DHCP.
5 ) Select
Yes.
The flat panel TV seeks and acquires an IP Address if available.
6 ) Press
EXIT or HMG to exit Home Media Gallery.
Manual:
Before activating, check your media server for IP Address and Subnet mask information.
1 ) Access the
Network Setup through the HMG Setup.
2 ) Select
Auto DHCP.
3 ) Select
No.
4 ) Select the appropriate box.
Use
or to highlight an entry item (IP Address or Subnet mask) then press ENTER.
No need to enter Default Gateway and DNS Server data.
5 ) Enter the figures using buttons
0 to 9.
Subnet mask (such as 255.255.255.0): Enter the same figures.
IP Address (such as 192.168.201.***): Enter the same figures as used in the media server (PC, etc.). For
***, enter 3-digit figures (0 – 254) that have not been used for other network connections.
Use
or to highlight other entry areas.
6 ) Press
ENTER on the appropriate box after the entry is complete.
Repeat Steps 4 to 5 to complete Network setup.
7 ) Press
EXIT or HMG to exit Home Media Gallery.
Network Setup
Default Settings
Auto Connection
On
PRO151FD.book Page 118 Wednesday, April 2, 2008 10:19 AM