About atrac files, Maintenance – Sony CDX-GT41UW Manuel d'utilisation

Page 15

Advertising
background image

15

About ATRAC files

ATRAC3plus format

ATRAC3, which stands for Adaptive Transform
Acoustic Coding3, is audio compression
technology. It compresses audio CD data to
approximately 1/10 of its original size.
ATRAC3plus, which is an extended format of
ATRAC3, compresses the audio CD data to
approximately 1/20 of its original size. The unit
accepts both ATRAC3 and ATRAC3plus format.
• The ATRAC is in the structure of a 2-level

hierarchy; one folder (group), two files (tracks).
– ATRAC CD

The maximum number of folders (groups) is
255, and the maximum number of files (tracks)
is 999.

– ATRAC Audio Device

The maximum number of albums/artists/
playlists is 65535, and the maximum number of
tracks is 65535.

• The characters for a folder/file name and text

information written by SonicStage are displayed.

For details on ATRAC CD and ATRAC Audio
Device, see the SonicStage manual.

Note
Be sure to create the ATRAC files using authorized

software, such as SonicStage.

ATRAC files cannot be played on USB devices other

than ATRAC Audio Device.

If you have any questions or problems concerning
your unit that are not covered in this manual, consult
your nearest Sony dealer.

Maintenance

Replacing the lithium battery of the
card remote commander

Under normal conditions, the battery will last
approximately 1 year. (The service life may be
shorter, depending on the conditions of use.)
When the battery becomes weak, the range of the
card remote commander becomes shorter.
Replace the battery with a new CR2025 lithium
battery. Use of any other battery may present a
risk of fire or explosion.

Notes on the lithium battery
Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately
consult a doctor.

Wipe the battery with a dry cloth to assure a good

contact.

Be sure to observe the correct polarity when

installing the battery.

Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Fuse replacement

When replacing the fuse, be
sure to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse
blows again after replacement,
there may be an internal
malfunction. In such a case,
consult your nearest Sony
dealer.

Cleaning the connectors

The unit may not function properly if the connectors
between the unit and the front panel are not clean. In
order to prevent this, detach the front panel (page 5)
and clean the connectors with a cotton swab. Do not
apply too much force. Otherwise, the connectors
may be damaged.

Notes
For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition
switch.

Never touch the connectors directly with your fingers

or with any metal device.

1

2

+ side up

c

WARNING

Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.

Fuse (10A)

Main unit

Back of the front
panel

Advertising
Ce manuel est liée aux produits suivants: