Sony MZ-N707 Manuel d'utilisation

Page 67

Advertising
background image

67

-GB

Volume cannot be
turned up.

• AVLS is on.

, Set AVLS to “AVLS OFF” (page 57).

An MD is not played
normally.

• Play mode is changed.

, Change to the normal play.

An MD is not played
from the first track.

• Disc playing stopped before it came to the last track.

, Press N for 2 seconds or more to start playing, or flip the

lever towards . repeatedly on the remote control.

• Group mode is turned on.

, Turn group mode off and play from the first track (press N

for 2 seconds or more to start playing, or flip the lever
towards . repeatedly on the remote control).

Playback sound
skips.

• The recorder is placed where it receives continuous vibration.

, Put the recorder on a stable place.

• A very short track may cause sound to skip.

, Try not to create a track under one second long.

Sound has a lot of
static.

• Strong magnetism from a television or such device is interfering

with operation.
, Move the recorder away from the source of strong

magnetism.

Cannot find the track
marks.

• You pressed X after pressing . or >.

, Press X before pressing . or > on the recorder or

flipping the lever towards

> or . on the remote

control.

The rechargeable
battery does not start
charging. The
rechargeable battery
cannot be fully
charged.

• The rechargeable battery has been inserted incorrectly or the AC

power adaptor has been connected incorrectly.
, Insert the battery correctly or connect the AC power adaptor

correctly.

• The terminals of the battery charging stand is dirty.

, Clean the terminals with a dry cloth (page 62).

The disc cannot edit
on other component.

• The component does not support LP2 stereo or LP4 stereo.

, Edit on other component that support LP2 stereo or LP4

stereo.

Momentary noise is
heard.

• Due to the special digital audio compression technology used in

LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
, Record in normal stereo or LP2 stereo mode.

The group function
(group mode/group
skip mode) does not
operate.

• When selecting program play, an attempt was made to turn

group mode on.
, Turn group mode on, before selecting program play.

Symptom

Cause/Solution

Advertising