Sony TA-VE610 - Manuel (Page 22)

22 EN
Additional Information
Specifications
Amplifier section
POWER OUTPUT
Stereo mode
(4 ohms at 1 kHz, THD 0.7%)
100 W + 100 W
Surround mode (4 ohms at 1 kHz, THD 0.7%)
Front: 100 W/ch
Center
*
: 100 W
Rear
*
: 100 W/ch
*
Depending on the sound field settings and the
source, sound will not be output.
5.1 mode (4 ohms at 1 kHz, THD 0.7%)
Front: 100 W/ch
Center: 100 W
Rear: 100 W/ch
Harmonic distortion at rated output
Less than 0.09% (with DIRECT PASS on)
Frequency response
PHONO: RIAA equalization curve
±0.5 dB
CD, TAPE/MD, VIDEO 1, 2:
10 Hz - 50 kHz +0
–1
dB (with DIRECT PASS on)
Inputs
General
System Preamplifier section:
Low-noise NF type equalizer
Power amplifier section:
Pure-complementary SEPP
Power requirements
230 V AC, 50/60 Hz
Power consumption
240 W
AC outlets 1 switched, maximum
100 W
Dimensions 430
Ч
155
Ч
350 mm
including projecting parts and controls
Mass (Approx.) 9.8 kg
Supplied accessories
See page 4.
Design and specifications are subject to change without
notice.
Impedance
S/N (weighting
network, input
level)
Sensitivity
PHONO
*
‘78 IHF
2.5 mV 50 kilohms
75 dB
*
(A, 2.5 mV)
82 dB
*
(A, 200 mV)
50 kilohms 200 mV
150 mV
CD
TAPE/MD, VIDEO 1, 2,
3, TV/LD, TUNER
200 mV 50 kilohms
82 dB
*
(A, 150 mV)
5.1 INPUT
Outputs VIDEO 1, 2 AUDIO OUT:
Voltage: 150 mV
Impedance: 10 kilohms
WOOFER:
Voltage: 2 V
Impedance: 1 kilohms
PHONES:
Accepts low and high impedance headphones
BASS BOOST +10 dB at 70 Hz
TONE ±8 dB at 100 Hz and 10 kHz
Video section
Inputs 1 Vp-p 75 ohms
Outputs 1 Vp-p 75 ohms
50 kilohms
82 dB
*
(A, 150 mV)