Sony TA-VE610 - Manuel (Page 12)

12 EN
Basic Operations
z
To select another component when a decoded Dolby
Digital (AC-3) program source is selected
Press any SYSTEM CONTROL/FUNCTION button to
turn off the 5.1 INPUT indicator on the main unit.
Making components selectable/
unselectable
You can do these settings so that certain components
become unselectable even if you press AUDIO/VIDEO
FUNCTION.
1
Press SET UP repeatedly to select FUNC HOOK
UP.
2
Use the digital processing control buttons ( /
) to select a component.
3
Use the digital processing control buttons ( /
) to select –Y– (selectable) or –N–
(unselectable).
Note
If you try to select the component which is set to –N– by
using the remote, “CANNOT USE” appears in the display.
Indexing Program Sources
You can enter a name of up to 8 characters for program
sources. These index names (for example, “VHS”)
appear in the amplifier’s display when a program
source is selected.
Note that no more than one name can be entered for
each program source.
This function is useful for distinguishing components
of the same kind; 2 VCRs, for example, can be specified
as “VHS” and “8MM,” respectively. It is also handy for
identifying components connected to jacks meant for
another type of component; for example, a second CD
player connected to the TUNER jacks.
Digital processing
control buttons
5.1 INPUT VIDEO FUNCTION AUDIO FUNCTION GENRE
TONE SUR INDEX
SET UP DIRECT PASS
MODE
DIRECT PASS
SOUND FIELD ON / OFF
BASS BOOST
BALANCE
L R
5.1 INPUT
5
0
1
3
9
7
4 6
2 8
10
• • • •
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
• • • •
•
PHONES
POWER
SPEAKERS
DPC MODE
A OFF A + B B g
MASTER VOLUME
VIDEO 1 VIDEO 2 VIDEO 3 TV/LD TAPE/MD CD TUNER PHONO
DISPLAY DIMMER
S VIDEO R L VIDEO AUDIO
VIDEO 3 INPUT
DPC MODE
DISPLAY VIDEO/AUDIO FUNCTION
1
Select the program source (component) to be
named.
2
Press DPC MODE repeatedly until the INDEX
indicator lights up.
3
Create an index name by using the digital
processing control buttons as follows:
Press
or to select a character, and then press
to move the cursor to the next position.
The index name is stored automatically.
To insert a space
Press or until a blank space appears in the
display (the space is between “]” and “A”).
If you’ve made a mistake
Press or repeatedly until the character you
want to change flashes. Then select the right
character.
To assign index names to other sources
Repeat the procedure above.