Connecting other equipment – Sony DSR-30 Manuel d'utilisation

Page 50

Advertising
background image

Editing

50

EN

Connecting other
equipment

For usage, connections, etc., refer to the instruction manual of the
equipment to be connected.

Connecting an editing controller

• When using this VCR as a recorder or as a player, set the LANC

MODE on this VCR to “S.”

• If the controller has a shuttle mode, set it to “B.”
• When you edit tapes using video/audio code and connecting an

editing controller RM-E1000T to this VCR (recorder), set the
“SEARCH” in the menu of RM-E1000T to “FF/REW.”

Connecting a titler and a digital SEG

• When using this VCR as a player, set “AUTO DISPLAY” on the SET

UP MENU to “OFF.”

• When connecting a titler and a digital SEG equipped with the S

VIDEO jack, use the S VIDEO connection.

Connecting a still picture capture board kit

• Set the LANC MODE on this VCR to “S.”

Connecting a Video Printer equipped with a LANC
jack.

• Set the LANC MODE on this VCR to “S.”

Making a tape duplication system by connecting a
number of DSR-30/30P units

• Make sure to use an audio/video distributor. If you make a loop

connection, picture and sound may deteriorate.

• When using a CONTROL S jack, you can make a loop-through

connection. Check the commander mode of the wired remote
commander and set the same mode on this VCR. (page 17)

• For details on a wired remote commander, consult the shop where

you purchased it.
You cannot use the following remote commanders with this VCR:
SVRM-100, RM-250, RM-S18 and RM-S52A.

Advertising