JVC AV-20FD23 - Manuel (Page 27)

27
POWER
RM-C394G
1 2 3
DISPLAY 7 8 9
4 5 6
SLEEP TIMER
0 TV RETURN
LIGHT
TV CATV
PAUSE/STILL OPEN/CLOSE
RETURN
AUDIO
REPEATA-B
CANCEL
SLOW
ZOOM TITLE
AUDIO
ANGLE
SUBTITLE
INPUT
C.C.
DVD SETUP
SELECT
/ENTER
TV MENU
MUTING
DVD
CONTROL
PLAY MODE
PREV NEXT TV/DVD DVD MENU
F.SEARCH PLAY B.SEARCH
STOP
+
CH
VOL VOL
+
CH
4
•
•
•
•
•
Reading
Playback procedure
Press PLAY or OPEN/
CLOSE on the unit.
The disc tray closes auto-
matically.
On the TV-screen,
changes to “Reading” and
then playback
commences.
• A menu screen may ap-
pear on the TV screen, if
the disc has a menu fea-
ture. In this case, press
, , , or SE-
LECT to operate a menu
feature.
1
Press OPEN/CLOSE on
the unit. The disc tray will
open.
2
Place a disc onto the tray.
Hold the disc, position it
with the printed label side
up, align it with the guides,
and place it in its proper
position.
3
Press STOP to end playback.
• The unit records the stopped point, depending on the
disc. “ ” appears on the screen. Press PLAY to resume
playback (from the scene point).
• If you press STOP again or unload the disc (“ ” appears
on the screen.), the unit will clear the stopped point.
5
To stop the playback, press STOP.
Then press OPEN/CLOSE on the unit.
The disc tray opens.
Remove the disc and press OPEN/CLOSE on the unit then
press POWER.
The disc tray closes automatically and unit turns off.
Note:
If a non-compatible disc is loaded, "Incor-
rect Disc", "Region Code Error" or "Paren-
tal Error" will appear on the TV screen ac-
cording to the type of loaded disc. In this
case, check your disc again (See pages 25
and 35).
Some discs may take a minute or so to start
playback.
When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the unit,
"Reading" will appear on the display for 10
seconds and then "No Disc" will continue
to be displayed.
Some playback operations of DVDs may be
intentionally fixed by software producers.
Since this unit plays DVDs according to the
disc contents the software producers de-
signed, some playback features may not be
available. Also refer to the instructions sup-
plied with the DVDs.
When playing DTS-encoded Audio CDs,
excessive noise will be heard from the ana-
logue stereo outputs. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analogue stereo outputs of the DVD player
are connected to an amplification system.
5C20401AE(24-27) 17/5/2002, 9:43 27