Accu-Chek Aviva NANO - Manuel (Page 24)

Meter Memory, Setup, and Data Transfer
22
3
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and
hold until
set-up appears on the
display.
1
Press and release
repeatedly until set-up
and the flashing 1Hr or
2Hr appear on the
display.
2
Press and release or
to select 1Hr or 2Hr.
Press and release to
set the option.
To set up more options,
press and release .
To exit, press and
hold
until the flashing test
strip symbol appears on
the display.
3
This display appears
when a post-meal test
reminder occurs.
NOTE
The post-meal test reminder:
• beeps 1 or 2 hours after the blood glucose test to remind you to do a post-meal test.
• beeps every 2 minutes up to 3 times.
• turns off by inserting a test strip or pressing any button.
• If a test was performed within 15 minutes of a test reminder, the test reminder does not beep.
• If the meter is on at the test reminder time, the test reminder does not beep.
• Exposure to cold conditions may disable test reminders until the meter is turned on.
Setting the Post-Meal Test Reminder
51689_05958458003_CA_EN.indb 22 9/3/13 4:10 PM