Accu-Chek Aviva NANO - Manuel (Page 23)

Meter Memory, Setup, and Data Transfer
3
21
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and
hold until
set-up appears on the
display.
1
Press and release
repeatedly until the
flashing beeper symbol
and On or OFF appear on
the display.
2
Press and release or
to switch between On
and OFF.
To set up more options,
press and release .
To exit, press and
hold
until the flashing test
strip symbol appears on
the display.
3
Setting the Beeper On or OFF
NOTE
The beeper prompts you:
• to apply blood or control solution to the test strip.
• when enough blood or control solution is drawn into the test strip.
• when the blood glucose or control test is complete.
• when a button is pressed.
• when it is time to perform a test (if you set the test reminders or post-meal test reminder).
• if an error occurred while performing a blood glucose or control test (even if the beeper is off, it still
beeps for an error).
51689_05958458003_CA_EN.indb 21 9/3/13 4:10 PM