Cadillac 2010 CTS - Manuel (Page 392)

9-92 Vehicle Care
14. Replace the air only hose (G)
and the power plug (H) and
cord back in its original
location.
15. Place the equipment in the
original storage location in the
vehicle.
The tire sealant and compressor kit
has an accessory adapter located in
a compartment on the bottom of its
housing that may be used to inflate
air mattresses, balls, etc.
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release
button.
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from your
dealer/retailer.
5. Push the new canister into
place.
Storing the Tire Sealant
and Compressor Kit
(Sedan)
The tire sealant and compressor kit
is located in the trunk.
Tire Sealant and Compressor Kit
without Pressure Deflation Button
A. Tire Sealant and Compressor Kit
B. Foam Container
C. Wing Nut
1. Open the trunk. See Trunk
(Sedan) on page 1‑17.
2. Locate the tire sealant and
compressor kit (A) in the center
of the cargo area.
3. Remove the wing nut (C) that
holds the tire sealant and
compressor kit (A) in place.