Cadillac 2010 CTS - Manuel (Page 339)

Vehicle Care 9-39
License Plate Lamp
(Wagon)
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
(Wagon) on page 1‑19 for more
information.
Passenger side shown,
driver side similar
2. Push the left end of the lamp
assembly towards the right.
3. Turn the lamp assembly down to
remove from liftgate.
A. Bulb Socket
B. Bulb
C. Lamp Assembly
4. Turn the bulb socket (A)
counterclockwise to remove
from lamp assembly (C).
5. Pull the bulb (B) straight out of
the bulb socket.
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install into lamp assembly.
7. Turn the lamp assembly into
the liftgate engaging the clip
side first.
8. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Fog Lamp
(Up Level Only)
H11LL
License Plate Lamp W5WLL
For replacement bulbs not listed
here, contact your dealer/retailer.