Cadillac 2010 CTS - Manuel (Page 14)

1-8 Keys, Doors and Windows
With Remote Start Shown,
Without Similar
Q
(Lock): Press once to lock the
doors. The turn signal indicators
flash. When
Q
is pressed twice, the
turn signal indicators flash twice,
and the horn sounds once to
confirm locking.
To program the vehicle so the turn
signal indicators do not flash and
the horn does not sound when
pressing
Q
on the keyless access
transmitter, see “Remote Door
Lock Feedback” under Vehicle
Personalization on page 4‑51.
K
(Unlock): Press once to unlock
only the driver door. The turn signal
indicators flash twice.
Press K twice within five seconds
to unlock all the doors. The interior
lamps may come on.
To program the vehicle so the turn
signal indicators do not flash and
the fog lamps and reverse lamps
remain on steady for about
20 seconds when the keyless
access transmitter is used to unlock
the vehicle, see “Remote Door
Unlock Feedback” under Vehicle
Personalization on page 4‑51.
For vehicles with the memory
feature, press
K
on the keyless
access transmitter to program and
recall the memory settings. See
“Memory Seat” under Power Seat
Adjustment on page 2‑4 for more
information.
/
(Remote Start): Press to
operate the remote start feature.
See Remote Vehicle Start on
page 1‑12 for additional
information.
V
/
&
(Remote Trunk/Liftgate
Release): Press and hold for
about one second to unlock the
trunk/liftgate. The automatic
transmission must be in P (Park) or
the manual transmission must be in
Neutral with the parking brake set.
L
(Vehicle Locator/Panic
Alarm): Press and release to
locate the vehicle. The horn sounds
three times and the turn signal
lamps flash three times.
Press and hold
L
for
three seconds to sound the
panic alarm. The horn sounds
and the turn signal lamps flash
for 30 seconds. Press and
release
L
again to stop
the alarm.