Instruments and controls 4-47 – Cadillac 2010 CTS Manuel d'utilisation

Page 157

Advertising
background image

Instruments and Controls

4-47

Adjust your driving accordingly. See
“Competitive Driving Mode” under
Traction Control System (TCS) on
page 8‑37
for more information.

Stabilitrak Not Ready

This message may display after first
driving the vehicle and exceeding
30 km/h (19 mph) for 30 seconds.
The TCS/StabiliTrak warning light
on the instrument panel cluster also
comes on. The StabiliTrak system is
not functional until the message has
turned off. See StabiliTrak System
on page 8‑38
for more information.

Stabilitrak Off

This message displays when you
turn off StabiliTrak, or when the
stability control has been
automatically disabled. The TCS/
StabiliTrak warning light on the
instrument panel cluster also
comes on.

To realize the full benefits of the
stability enhancement system, you
should normally leave StabiliTrak

on. To turn the StabiliTrak system
on or off, see StabiliTrak System on
page 8‑38
.

There are several conditions that
can cause this message to appear.

.

One condition is overheating,
which could occur if StabiliTrak
activates continuously for an
extended period of time.

.

The message also displays if the
brake system warning light is on.
See Brake System Warning
Light on page 4‑26
.

.

The message could display if the
stability system takes longer
than usual to complete its
diagnostic checks due to driving
conditions.

.

The message displays if an
engine or vehicle related
problem has been detected and
the vehicle needs service. See
your dealer/retailer.

The message turns off as soon as
the conditions that caused the
message to be displayed are no
longer present.

Suspension Mode Sport
(CTS-V Only)

This message will be displayed
when sport mode is selected using
the Magnetic Ride Control button in
the center of the instrument panel.
See Magnetic Ride Control on
page 8‑40
for more information.

Suspension Mode Tour
(CTS-V Only)

This message will be displayed
when touring mode is selected
using the Magnetic Ride Control
button in the center of the
instrument panel. See Magnetic
Ride Control on page 8‑40
for more
information.

Advertising