Cadillac 2010 CTS - Manuel (Page 102)

3-2 Storage
Additional Storage
Features
Cargo Cover
The cargo cover can be used to
cover items in the cargo area of
the vehicle.
To install the cargo cover:
1. Hold the cartridge so that the
pull out shade faces backwards.
2. Align the cartridge over the
pin (B) on both sides. Press the
cartridge down and turn it
slightly forward until it clicks.
3. Make sure the cartridge is
properly installed by pulling it
slightly up, it should be firmly
fitted.
4. Grasp the handle and unroll the
cover. Latch the posts into the
sockets on the inside of the
vehicle to secure it.
To remove the cargo cover, do the
following:
1. Release the cover from the latch
posts and carefully roll it
back up.
2. Pull the handle (A) back and
remove it from the pin (B) on the
trim panel. Repeat this on the
other side.