Immobilizer operation (keyless access), Immobilizer operation, Keyless access) -28 – Cadillac 2012 CTS Manuel d'utilisation

Page 60: 28 keys, doors, and windows

Advertising
background image

Black plate (28,1)

Cadillac CTS/CTS-V Owner Manual (Include Mex) - 2012

2-28

Keys, Doors, and Windows

If the engine still does not start with
the other key, the vehicle needs
service. If the vehicle does start,
the first key may be damaged.
See your dealer who can service
the theft-deterrent system and have
a new key made.

It is possible for the theft-deterrent
system decoder to learn the
transponder value of a new or
replacement key. Up to 10 keys
can be programmed for the vehicle.
The following procedure is for
programming additional keys only.

To program a new key:

1. Verify that the new key has

1

stamped on it.

2. Insert the current key in the

ignition and start the engine.
If the engine will not start,
see your dealer for service.

3. After the engine has started,

turn the key to LOCK/OFF, and
remove the key.

4. Insert the key to be programmed

and turn it to ON/RUN within
five seconds of the ignition being
turned to LOCK/OFF in Step 3.

5. The security light will turn off

once the key has been
programmed. It may not be
apparent that the security light
went on due to how quickly the
key is programmed.

6. Repeat Steps 1 through 4 if

additional keys are to be
programmed.

Do not leave the key or device that
disarms or deactivates the theft
deterrent system in the vehicle.

Immobilizer Operation
(Keyless Access)

This vehicle has a passive
theft-deterrent system.

The system does not have to be
manually armed or disarmed.

The vehicle is automatically
immobilized when the ignition
control knob is turned to LOCK/OFF.

The immobilization system is
disarmed when the ignition control
knob is pushed in and a valid
transmitter is found in the vehicle.

The security light, located in the
instrument panel cluster, comes on
if there is a problem with arming
or disarming the theft-deterrent
system.

Advertising