Overheated engine protection operating mode, Overheated engine, Protection operating mode -25 – Cadillac 2012 CTS Manuel d'utilisation

Page 345: Vehicle care 10-25

Advertising
background image

Black plate (25,1)

Cadillac CTS/CTS-V Owner Manual (Include Mex) - 2012

Vehicle Care

10-25

If No Steam Is Coming from
the Engine Compartment

If an engine overheat warning is
displayed but no steam can be seen
or heard, the problem may not be
too serious. Sometimes the engine
can get a little too hot when the
vehicle:

.

Climbs a long hill on a hot day.

.

Stops after high-speed driving.

.

Idles for long periods in traffic.

.

Tows a trailer.

If the overheat warning is displayed
with no sign of steam:

1. Turn the air conditioning off.

2. Turn the heater on to the highest

temperature and to the highest
fan speed. Open the windows as
necessary.

3. In heavy traffic, let the engine

idle in N (Neutral) while stopped.
If it is safe to do so, pull off
the road, shift to P (Park) or
N (Neutral) and let the
engine idle.

If the temperature overheat gauge
is no longer in the overheat zone or
an overheat warning no longer
displays, the vehicle can be driven.
Continue to drive the vehicle slow
for about 10 minutes. Keep a safe
vehicle distance from the car in front
of you. If the warning does not come
back on, continue to drive normally.

If the warning continues, pull over,
stop, and park the vehicle
right away.

If there is no sign of steam, idle the
engine for three minutes while
parked. If the warning is still
displayed, turn off the engine until it
cools down. Also, see “Overheated
Engine Protection Operating Mode”
next in this section.

Overheated Engine
Protection
Operating Mode

This operating mode allows the
vehicle to be driven to a safe place
in an emergency. Should a hot
engine condition exist, an overheat
protection mode which alternates
firing groups of cylinders helps
prevent engine damage. In this
mode, there is a loss in power and
engine performance. Driving
extended distances and/or towing a
trailer in the overheat protection
mode should be avoided.

Advertising