Remote vehicle start, Remote vehicle start -13 – Cadillac 2012 CTS Manuel d'utilisation

Page 45

Advertising
background image

Black plate (13,1)

Cadillac CTS/CTS-V Owner Manual (Include Mex) - 2012

Keys, Doors, and Windows

2-13

Remote Vehicle Start

This vehicle may have a remote
starting feature that allows you to
start the engine from outside the
vehicle.

/

(Remote Vehicle Start):

This button will be on the RKE
transmitter if you have remote start.

The automatic climate control will
begin to heat or cool your vehicle
during remote start depending on
the temperature inside and outside
of the vehicle. The windshield
defroster and/or rear window
defogger turn on if it is cold outside.
If the vehicle has heated seats,
they may also be turned on during
remote start to warm up the seats
in cold weather. Normal operation
of the climate control system
returns after the ignition is turned to
ON/RUN. See Dual Automatic
Climate Control System on
page 8‑1
.

Laws in some local communities
may restrict the use of remote
starters. For example, some laws
may require a person using remote
start to have the vehicle in view
when doing so. Check local
regulations for any requirements
on remote starting of vehicles.

If your vehicle is low on fuel,
do not use the remote start feature.
The vehicle may run out of fuel.

If your vehicle has the remote start
feature, the RKE transmitter
functions will have an increased
range of operation. However, the
range may be less while the vehicle
is running.

Other conditions can affect the
performance of the transmitter;
see Remote Keyless Entry (RKE)
System on page 2‑5
for additional
information.

Starting the Engine Using
Remote Start

To start the engine using the remote
start feature:

1. Aim the transmitter at the vehicle

and press and release

Q

on the

transmitter.

2. Press and hold

/

for at least

four seconds or until the
vehicle's turn signal lamps flash.
The parking lamps will turn on
and remain on as long as the
engine is running. The vehicle's
doors will be locked.

3. After entering the vehicle during

a remote start, press the brake
pedal and turn the ignition to
ON/RUN to drive the vehicle.

After a remote start, the engine
will automatically shut off after
10 minutes unless a time
extension has been done or the
ignition has been turned to
ON/RUN.

Advertising