Seats and restraints 3-53 – Cadillac 2012 CTS Manuel d'utilisation

Page 121

Advertising
background image

Black plate (53,1)

Cadillac CTS/CTS-V Owner Manual (Include Mex) - 2012

Seats and Restraints

3-53

WARNING (Continued)

Secure rear-facing child restraints
in a rear seat, even if the
airbag is off. If you secure a
forward-facing child restraint in
the front seat, always move the
front passenger seat as far back
as it will go. It is better to secure
the child restraint in a rear seat.

See Passenger Sensing System
on page 3‑28
for additional
information.

If the child restraint has the LATCH
system, see Lower Anchors and
Tethers for Children (LATCH
System) on page 3‑43
for how and
where to install the child restraint
using LATCH. If a child restraint is
secured using a safety belt and it
uses a top tether, see Lower
Anchors and Tethers for Children
(LATCH System) on page 3‑43
for
top tether anchor locations.

Do not secure a child seat in a
position without a top tether anchor
if a national or local law requires
that the top tether be anchored, or if
the instructions that come with the
child restraint say that the top strap
must be anchored.

In Canada, the law requires that
forward-facing child restraints have
a top tether, and that the tether be
attached.

You will be using the lap-shoulder
belt to secure the child restraint in
this position. Follow the instructions
that came with the child restraint.

1. Move the seat as far back as it

will go before securing the
forward-facing child restraint.

When the passenger sensing
system has turned off the front
passenger frontal airbag, the off
indicator on the passenger
airbag status indicator should
light and stay lit when the
vehicle is started. See
Passenger Airbag Status
Indicator on page 5‑19
.

2. Put the child restraint on

the seat.

3. Pick up the latch plate, and run

the lap and shoulder portions of
the vehicle's safety belt through
or around the restraint. The child
restraint instructions will show
you how.

4. Push the latch plate into the

buckle until it clicks.

Position the release button on
the buckle, so that the safety
belt could be quickly unbuckled
if necessary.

Advertising