Cuisinart CBT-500FPC - Manuel (Page 13)

13
(250 ml) at a time on mix for 10-15 seconds. Turn blender dial to Off.
Continue on Page 13....
Crushing Ice (Blender Jar Only)
Add up to 10 large ice cubes to blender jar. Press the Ice Crush
button, using short bursts, 10 times or until cubes are the consisten-
cy of snow. Turn blender off. Pulse fewer times if coarsely chopped
ice is desired.
Grating Citrus Zest
For best results, blender jar and cutting assembly must be clean
and dry. Remove zest from fruit in strips (using vegetable peeler).
Use no more than 8 strips at a time (zest of one medium lemon).
Cut strips in half. Add strips and 1 teaspoon (5 ml) sugar (from
recipe) to the blender jar. Blend on High for 15-20 seconds. Turn
blender off.
Grinding Hard Cheese
Cut cheese into 1 ⁄
2
" (1.25 cm) pieces. Blend on High for 30 seconds.
Turn blender off. For best results, grind no more than 3 ounces (90
g) of cheese at a time.
Grinding Spices
For best results, blender jar and cutting assembly must be clean
and dry. Add
1 ⁄
4
- 1 ⁄
2
cup (50-125 ml) of spices, seeds or peppercorns to
blender jar. Blend on High for 30-35 seconds. Turn blender off.
Whipping Cream
Whip 1 cup (250 ml) of cream (whipping or heavy cream) at a time.
Blend on Low, and process for 45-60 seconds or until creamy and
smooth. If making sweetened cream, add sugar after 10 seconds.
Turn blender off. Makes about 1 cup (250 ml).
Puréeing Sun-Dried Tomatoes
Rehydrate 1 ounce (30 g) of tomatoes in 1 cup (250 ml) boiling water.
Allow to sit for 10 minutes or until softened. Add tomatoes and water
to blender jar. Cover and pulse on High 5 times; then run continuously
on food processor speed for 15-20 seconds. Turn blender off. Drain in
fine strainer if desired. Makes about
1 ⁄
2
cup (125 ml) of puréed toma-
toes.
CLEANING AND STORING YOUR
SMARTPOWER PREMIER DUET
™
FOOD PROCESSOR ATTACHMENTS
Store the chopping blade and slicing/shredding disc as you would
sharp knives – out of the reach of children.
The work bowl, cover, pusher, chopping blade, and slicing/shredding
disc are top-shelf dishwasher safe. When placing parts in your dish-
washer, insert the work bowl upside down. Remember where you
place the sharp blade and disc, and be certain to unload the
dishwasher carefully.
The gearbox collar is not immersible. To clean, just wipe with a
damp cloth.
If you wash the blades and discs by hand, do it carefully.
Avoid leaving them in soapy water where they may disappear
from sight. To clean the metal blade, fill the work bowl with soapy
water, hold the blade by its plastic centre and move rapidly up and
down on the centre shaft of the bowl. Use of a spray hose is also
effective. If necessary, use a brush.
The work bowl should not be placed in a microwave oven.
WARRANTY
LIMITED THREE-YEAR WARRANTY
This warranty supersedes all previous warranties on the Cuisinart ®
Supreme™ Commercial Quality Ice Cream Maker. This warranty is
available to consumers only. You are a consumer if you own a
Cuisinart
® Supreme™ Commercial Quality Ice Cream Maker that
was purchased at retail for personal, family or household use. This
warranty is not available to retailers or other commercial purchasers
or owners.
We warrant that your Cuisinart® Supreme™ Commercial Quality Ice
Cream Maker will be free of defects in material or workmanship
under normal home use for three years from the date of original
purchase.
For warranty purposes, we would like to suggest that you register
your product on-line at www.cuisinart.ca to facilitate verification of
the date of original purchase. However, should you not wish to reg-
ister on-line we recommend that you maintain original receipt indi-
cating proof of purchase. In the event that you do not have proof of
purchase date, the purchase date for purposes of this warranty will
be the date of manufacture.
When calling our Authorized Service Centre for in warranty service
please make reference to your model number and the manufactur-
ing date code. This information can be found in the rating area on
the body or underneath the base of your unit. The model number
will follow the word Model: CBT-500FPC. The manufacturing date
code is a 4 or 5 digit number sometimes followed by a letter.
Example, 40630K would designate year, month & day (2004, June
30th).
CBT-500FPPC_v2_IB_BIL 2/24/05 10:54 AM Page 13